igus launches new sizes and diameters for iglidur round bars and plates

Plastic and plain bearing specialist igus enhances its special program for tribo polymer applications with iglidur semi-finished products in new sizes and diameters.

Body: Round bars are available in lengths from 100 to 1000 mm and in diameters from 10 to 100 mm; iglidur plates in thickness of 2 to 25 mm lie in store at igus. With these additional widths, designers gain more scope for individual design. Upon request, igus offers the manufacturing of special parts according to the drawing.

iglidur round bars and plates from the tribo polymer specialist igus are becoming more and more diverse and facilitates users adaptations of individual machine requirements. Mechanically machined bearings made of lubrication-free igus high-performance plastics are used wherever standard moulded parts are not worth the effort. Therefore the bearings are also appropriated for special parts as well as for smallest and medium series. With the scale of materials and sizes it is possible, to quickly make prototypes and to test the applicability for the series in a cost-effective way.

Large range of materials and sizes

Because igus tribo semi-finished products as well as the bearings are made of the tested iglidur plain bearing materials, all respective bearings can be calculated in advance online with the help of the specially developed expert system. Meanwhile 10 iglidur materials with specific features are available for a large variety of branches, such as the food, tobacco or automobile industry. Round materials, for example in the blue iglidur A350 material were available in diameters of 30, 40, 50 and 60 mm. Now they are also available in the small 20 mm diameter. They are suitable for medium to high loads and temperatures up to +180 °C. In addition they conform with FDA requirements and the first choice for the food industry. Round bars made of the material J 4 are now available in four new dimensions: in length of 20, 40, 50 and 60 mm.

igus round materials are available from stock in full bars up to 1 m in increments of 100 mm. Diameters vary between 10 and 100 mm.

iglidur J plates in seven thickness

The scope also grows for slide rails and rings: iglidur plates that are suitable for the production of such parts are currently available in seven material thicknesses from 2 to 25 mm. When used for guide tubes in operation tables, telescope arms for loading cranes or slide rails, all plates from igus are made of the proven tribo-optimised plastic iglidur J. The high-performance material eliminates low friction values in dry runs, it is exceedingly wear-resistant, lubrication and maintenance-free as well as resistant to chemicals.

Finished forms with igus speedicut

iglidur semi-finished products can be directly manufactured at igus – customized for your own processing. Furthermore, igus offers a special service with “speedicut”: With it you can directly get semi-finished product tools according to your own drawings. After a very short quotation process, the first prototypes or smallest series are deliverable within 10 days according to the customer’s requirements.

Picture PM3213-1

iglidur J plates are currently available in seven material thicknesses from 2 to 25 mm. The igus speedicut service allows users to have the desired part and sizes machined according to their drawing. The finally machined parts can be delivered from 1 unit. (Source: igus GmbH)

For more details visit : http://www.igus.in/wpck/9866/N13_9_2_Platten_neue_Groessen

About igus India:

igus® operations in India started in the year 1998 with head quarters in Bangalore. igus offers widest range of products that includes polymer bearings, igubal® PillowBlock Bearings, DryLin® linear bearings & guide systems enable them to serve the whole industrial establishments in India from a small work shop to huge industrial establishments.

igus RX tube proves itself in a test with real conditions

The plastic energy tube RX, from igus, successfully resists chips when put through hard operation. This test result concludes after a defined period of 100,000 double strokes and a steady feed of metal chips with different sizes. Comparisons highlight that statements about chip tightness of energy tubes can only be made on the basis of test that simulate real operating conditions.

If moving cables in the workspace of lathes, milling and sawing machines need to be protected, energy chains need to be chip tight inwardly and simultaneously guide the cables with low abrasion. For this purpose, igus has already developed its first foldable plastic energy tube R68. The latest energy tube RX now offers comprehensive protection against chips of any size.

A test is not equal to any other test

In order to be able to make statements about the tightness of energy tubes, the tubes need to be extensively tested. Here the IP classifications serve as an indicator. For over 10 years now igus continues to check energy tubes in the company-owned test laboratory in Cologne. There are several advantages of the igus test series: One being that the test cycles take place among real environmental conditions. To make statements about the real tightness of an energy tube, its subsequent use needs to be simulated precisely.

Simulation close to reality: 100,000 double strokes among impacts of chips

For this reason, igus has developed a standardized test to move energy tubes over 100,000 double strokes. At the same time, a defined load of chips of different sizes is periodically poured on the energy tube again and again. The principle is comparable to a washing machine drum. At the end of the cycles it is analysed how many grams of chips can get into interior space. The result was that only 0.23 grams of chips were in RX tube after 100,000 double strokes with a feed of 1,000 grams of metal chips. This is equal to 0.023 percent.

Picture PM2913-02: Simulation test close to reality: the RX tube successfully protects moving cables against chips. (Source: igus GmbH)

For more details visit: http://www.igus.in/wpck/7060/App_Overview_RXRohre

The rounded outside profile lets chips fall off

Comparative tests with other manufacturers’ energy chains show a much higher volume of chips in the inside of the tube. The reason for the better result of the RX tube is its rounded profile. On its smooth and convex outer contour the chips simply fall out of on contact with the surface. Apart from that, igus verifies that the chips are deposited in the stop system of the energy tube. This could lead to a change of the bending radius resulting in the tube not moveing safe and crashing against projecting edges at the worst. The RX tube offers best protection due to especially smooth contours and tight production tolerances – no chips got between the stoppers during the test. The results from igus show that tests among real conditions need to be performed to get reliable statements about the chip tightness of an energy tube in operation.

About igus India:

igus® operations in India started in the year 1998 with head quarters in Bangalore. igus offers widest range of products that includes polymer bearings, igubal® PillowBlock Bearings, DryLin® linear bearings & guide systems enable them to serve the whole industrial establishments in India from a small work shop to huge industrial establishments.

Igus launches One Cable Technology Solution

igus India, specialist for energy chains and cables, now has a single-cable solution for servo motors in it’s program: The hybrid servo cable has an integrated hyperface bus element. With it, the company takes up the currently emerging trend of the single-cable technology for servo motors. The hybrid servo cable is based on the chainflex cable series CF270.UL.D.

In the field of drive technology, servo motor and the converter are generally connected with two cables - one servo cable for the energy supply of the motor and an encoder cable to give data about rotation speed and position of the motor back to the control. Currently, drive manufacturers increasingly offer servo motors with single-cable technology. The principle: Energy supply as well as data feedback are coupled in one cable. In this case complex measuring system cables, which are usually used for the encoder function, are replaced by bus technology.

Hybrid-servo cable from igus: single-cable solution with hyperface bus

igus already anticipated the present trend of single-cable solutions for servo motors on the current year’s Hannover Fair and has introduced a single cable solution with integrated hyperface bus element. The main advantage over a “standard” servo cable is it’s space-saving function, a very important aspect for the use in energy chains. Apart from that, the number of plugs and therefore the costs for additional material and installation is reduced.

Protecting shield for maximum EMC

A good and durable shield is especially important for servo cables to prevent possible disturbances of neighbouring cables within the energy chain.

This is even more important in the case of the newly developed hybrid cable, because the sensitive bus signals are directly integrated into the servo cable. For this reason the element shield as well as the entire shield of the hybrid cable from igus is made of a particularly bending-resistant shield made of tinned copper wires with an optical covering of 80%. The high-quality shields ensure the electromagnetic compatibility of the cable.

High-end – durable and developed for the energy chain

Above that the hybrid servo cable has been developed especially for the use in energy chains and disposes of a maximum bending radius of 10 x cable diameter.

The basis of the hybrid cable is the technically high-level chainflex family CF270.UL.D that has been in the market for more than 5 years. It’s good durability is permanent under excessive load conditions, this is the result of the specific igus design: The core pairs, stranded with optimal pitch length, satisfy the high mechanic demands of constantly moving use. They offer a constant high protective effect to ensure proper electric performance. A low-adhesion PUR outer jacked covers the cable. It is customised to the specific demands in energy chains and provides a long lifetime of the cable due to the proven igus materials.

For more information visit: http://www.igus.in/wpck/5532/N09_2_04_CF270ULD?CL=IN-en&sop=1

Moreover this hybrid cable corresponds with relevant standards such as UL, CSA and NFPA79.2012 and is oil resistant. Due to its Desina conforming orange outer jacket, its flame-retardance and freedom of halogen, this new cable fulfils the demands especially for the use in machining centres and machine tools. Such features are also appreciated in conveyor technology as well as in cryogenic temperature applications.

About igus India:

igus® operations in India started in the year 1998 with head quarters in Bangalore. igus offers widest range of products that includes polymer bearings, igubal® PillowBlock Bearings, DryLin® linear bearings & guide systems enable them to serve the whole industrial establishments in India from a small work shop to huge industrial establishments.

Igus launches Hybrid servo cable with bus element for the energy chain

igus India, specialist for energy chains and cables, now has a single-cable solution for servo motors in it’s program: The hybrid servo cable has an integrated hyperface bus element. With it, the company takes up the currently emerging trend of the single-cable technology for servo motors. The hybrid servo cable is based on the chainflex cable series CF270.UL.D.

In the field of drive technology, servo motor and the converter are generally connected with two cables - one servo cable for the energy supply of the motor and an encoder cable to give data about rotation speed and position of the motor back to the control. Currently, drive manufacturers increasingly offer servo motors with single-cable technology. The principle: Energy supply as well as data feedback are coupled in one cable. In this case complex measuring system cables, which are usually used for the encoder function, are replaced by bus technology.

Hybrid-servo cable from igus: single-cable solution with hyperface bus

igus already anticipated the present trend of single-cable solutions for servo motors on the current year’s Hannover Fair and has introduced a single cable solution with integrated hyperface bus element. The main advantage over a “standard” servo cable is it’s space-saving function, a very important aspect for the use in energy chains. Apart from that, the number of plugs and therefore the costs for additional material and installation is reduced.

Protecting shield for maximum EMC

A good and durable shield is especially important for servo cables to prevent possible disturbances of neighbouring cables within the energy chain.

This is even more important in the case of the newly developed hybrid cable, because the sensitive bus signals are directly integrated into the servo cable. For this reason the element shield as well as the entire shield of the hybrid cable from igus is made of a particularly bending-resistant shield made of tinned copper wires with an optical covering of 80%. The high-quality shields ensure the electromagnetic compatibility of the cable.

High-end – durable and developed for the energy chain

Above that the hybrid servo cable has been developed especially for the use in energy chains and disposes of a maximum bending radius of 10 x cable diameter.

The basis of the hybrid cable is the technically high-level chainflex (Flex CableApplication) family CF270.UL.D that has been in the market for more than 5 years. It’s good durability is permanent under excessive load conditions, this is the result of the specific igus design: The core pairs, stranded with optimal pitch length, satisfy the high mechanic demands of constantly moving use. They offer a constant high protective effect to ensure proper electric performance. A low-adhesion PUR outer jacked covers the cable. It is customised to the specific demands in energy chains and provides a long lifetime of the cable due to the proven igus materials.

Moreover this hybrid cable corresponds with relevant standards such as UL, CSA and NFPA79.2012 and is oil resistant. Due to its Desina conforming orange outer jacket, its flame-retardance and freedom of halogen, this new cable fulfils the demands especially for the use in machining centres and machine tools. Such features are also appreciated in conveyor technology as well as in cryogenic temperature applications. 

Picture PM2413-01:

Make one out of two: The igus hybrid servo cable with bus element as single-cable solution for the use in the new servo technology.

(Source: igus GmbH)

For more information visit 
http://www.igus.in/wpck/default.aspx?Pagename=N13_2_3_Servoleitung_RS_485&C=IN&L=en

About igus India:

igus® operations in India started in the year 1998 with head quarters in Bangalore. igus offers widest range of products that includes polymer bearings, igubal® PillowBlock Bearings, DryLin® linear bearings & guide systems enable them to serve the whole industrial establishments in India from a small work shop to huge industrial establishments.

Make your own polymer rotary tables in the size of your choice

With the help of the flexible iglidur J universal sliding element from the igus, the user can now tailor the desired size of his rotary table bearing. Polymer rotary table bearings (PRT) from the igus exist in seven sizes and three types. There is also an igus PRT with quadratic flange for direct assembly on a flat surface.

iglidur PRT is a rotary table bearing with the proven advantages of igus polymer plain bearings. The sliding elements made of the tribo-optimized plastic iglidur J run totally maintenance and lubrication-free. The counterfaces of the rotary table bearing are mostly made of aluminium and are hard-anodized. As a result they also have very good tribological and sliding features.

Install and forget

Rotary table bearings are often used for slow pivoting and rotating motions that are operated manually: The ready-to-install rotary table bearings have a self-locking effect, for example in case of pivoting control panels of machines. At clocked movements in assembly lines, they work perfectly for a long time, no matter how often the movement is performed.

iglidur rotary table bearings – large, larger, infinite…

The smallest iglidur rotary table bearings have an inside diameter of 20 mm and the largest 300 mm. There are five other sizes are in between. igus engineers have now developed a flexible plastic universal sliding element with which rotary table bearings in most different sizes can be achieved: By putting iglidur J sliding elements together, rotary tables from an inside diameter of 500 mm up to almost infinite can be manufactured as desired. A rotary table bearing with a diameter of one meter that is built up on that basis can be loaded with up to ten tonnes according to its model. With it igus successfully managed the entry into large to very large rotary table bearings. Large rotary tables are particularly required in the solar technology, for assembly units or fixture construction. For such applications, igus not only delivers the sliding elements, but also supports the design engineer with information about precise dimensions and tolerances. With it the assembled bearing unit can be used immediately.

Rotary table bearing with square flange

All igus rotary table systems are wear-resistant, corrosion-free and easy to install – especially the new polymer rotary table bearing with square flange. It can be mounted on the flat surface with four screws only and without inlet holes. This avoids an additional distance ring. This rotary table has been designed for handling systems, the furniture industry and for display and advertising technology.

With many variants and flexiblity

Along with the seven sizes, igus rotary table bearings are available in three versions: a robust standard version also with mounted gear wheel, a cost-effective variant made of one element as well as light-weight low-cost-version with an inside diameter of 80 mm. For accessories igus offers in addition to manual clamp and drive journal distance rings for other sizes – optionally made of aluminium or plastic.

Picture PM2313-01:

If you put together single sliding elements made of iglidur J, rotary table systems from an inside diameter of 500 mm up to almost to any size can be manufactured as requested. With a diameter of one meter, a load of up to 10 tonness is possible according to the model. (Source: igus GmbH)

For more info please visit: http://www.igus.in/wpck/default.aspx?Pagename=app_overview_igli&C=IN&L=en

About igus India:

igus® operations in India started in the year 1998 with head quarters in Bangalore. igus offers widest range of products that includes polymer bearings, igubal® Pillow Block Bearings, Journal Bearings, DryLin® linear bearings & guide systems enable them to serve the whole industrial establishments in India from a small work shop to huge industrial establishments.

igus adds HD and motor variant to the e-spool series

igus further develops its offer of winding energy chain systems. The new igus “e-spool” heavy duty (HD) and motor flange versions are even more powerful. The HD variant is equipped with an extra strong spring to retract the energy chain at vertical applications. Moreover the motor version with motor flange is available for high filling loads and movements in any direction. The e-spool connects two energy supply systems into one system – a standard energy chain being wound and an igus twisterband for rotational movements.

No matter whether it’s, flat on or underneath the ground – the winding and space-saving energy chain system e-spool from igus is variably applicable in any directions. More importantly, e-spool is the only solution that guides all media types such as data, compressed air and liquids flexibly and with minimum space in one system. E-spool connects two different energy supply systems in one system – a standard energy chain guided via a reel that always supports the proper length and tension of the energy supply system and, an igus twisterband that performs rotational movements. This design allows movements in any direction, hence is suitable for a number of fields of application: process cranes, mobile crane trucks, sorting plants or stage applications.

e-spool module construction kit: three variants, three lengths and two versions

igus offers different e-spool solutions, depending on the pull out direction and load: The standard e-spool (SP) with a spring mechanism for spooling up the chain is appropriated for most applications and for any directions. Some vertical applications require a higher retraction force. Now the heavy duty variant (SPHD) comes into play: Here the retraction spring is stronger to be able to spool up the energy chain up to 14 m without problems. In addition, a motor variant with flange (SPM) is offered for especially high loads in any direction. igus delivers e-spool for the use with motor including motor coupling. The user installs motor and control.

All three e-spool versions are available in different extension lengths with 4, 7 or 14 m and one or two twisterbands in the standard program. The maximum spooling speed is about 1 m/s.

Modular alternative to the classic cable drum

The twisterband connects the reel with the shaft support, which serves as an interface to the permanently installed cables. This avoids the costly conventional slip ring that is usually used for cable drums. With it different cables can be connected, replaced or added any time within the smallest space in  a complete system. The twisterband gives the largest possible cable diameter of 17 mm and the minimal bending radius of 75 mm. For more capacity, twisterbands can be used on both sides of the drum.

 Picture PM1913-01:

The e-spool from igus allows movements in any direction – for assembly cranes, lift trucks or ventilation systems. (Source: igus GmbH)

Picture PM1913-02:

e-spool heavy duty for vertical applications: a strong retraction spring spools up the chain up to 14 m. (Source: igus GmbH)

For more information please visit: http://www.igus.in/wpck/default.aspx?Pagename=e_spool&C=IN&L=en

About igus India:

igus® operations in India started in the year 1998 with head quarters in Bangalore. igus offers widest range of products that includes polymer bearings, igubal® Pillow Block Bearings, Journal Bearings, Cablemanagement solutions, DryLin® linear bearings & guide systems enable them to serve the whole industrial establishments in India from a small work shop to huge industrial establishments.

igus measuring system cable is business class

igus has optimized its chainflex measuring system cables CF113.D and CF11.D: The new igus measuring systems cables have been further developed for smaller radii with a bending radius of at least 7.5 x cable diameter and dispose of accordingly high-quality superstructures. They are available from stock as yard goods or ready-made in 20 manufacturer standards.

Measuring system cables communicate the movement of a motor back to the control. They are used in any manufacturing machines for example in wood processing or in machine tools, but also in storage and retrieval units, in semi-conductor assembly or crane applications. For this reason five different qualities of measuring system cables are available in the chainflex program. Because, for as many applications possibilities there are as many motor manufacturers that want delivery. At the customers choice, a broad spectrum of 40 core cross section combinations.

Variety for almost any measuring systems

The chainflex cable program from igus provides a grand range of measuring systems cables for the use in energy supply systems. The cables are equipped with a PVC & PUR outer jacket for medium and high stresses. As a high-end solution for maximum stress the customer can go back to a TPE jacket. In addition there is a cable series for torsion applications. According to the drive technology systems from 20 manufacturers all cables are offered as ready-made yard goods or with plug connectors. 760 cable versions result in combination with the different measuring systems cables.

New in the program are the optimized measuring system cables of the series CF113.D and CF11.D for small radii with a bending radius of at least 7.5 x cable diameter. Both products offer optimized stranding and shield structures for especially small spaces and a high-quality substructure with gusset-filling pressure extruded inner jacket.

High-end measuring system cables in PUR and TPE quality

CF11.D as well as CF113.D is developed for highest stress. Of the same high value is its cable structure: an especially durable conductor, inner and outer shield made of extremely bending-resistant copper shielding braid and an inner jacket made of TPE. With respect of the abrasion resistance the outer jacket has been especially optimized for requirements in energy chains.

The chainflex cable (FlexCable Application) CF113.D is shielded with an outer jacket of a low-adhesion and highly abrasion-resistant mixture on the basis of PUR. A highly flexible TPE outer jacket protects the chainflex cable CF11.D. Both measuring system cables are coolant-resistant, hydrolysis and microbe-resistant, halogen-free and PVC-free and also oil resistant – the CF11.D even against bio oil. This allows inside and outside applications – even for travels of 100 meters (CF113.D) up to 400 meters (CF11.D). Above that the CF113.D is flame-retardant and notch-resistant. It is in accordance with UL, CSA and NFPA approvals, which makes it interesting for requirements in machine tool building. chainflex CF113.D and CF11.D are standardized in accordance with the Desina-standard.

Picture PM2213:

The new igus chainflex measuring system cable CF113.D disposes of a 25 % lower bending radius compared to the previous version and is hence suited for small spaces. It has a bending factor of at least 7.5 x cable diameter. (Source: igus GmbH)

About igus India:

igus® operations in India started in the year 1998 with head quarters in Bangalore. igus offers widest range of products that includes polymer bearings, igubal® Pillow Block Bearings, JournalBearings, DryLin® linear bearings & guide systems enable them to serve the whole industrial establishments in India from a small work shop to huge industrial establishments.